A LEGO Technic simple Pneumatic Engine which runs with two pumps, unmodified switch and cylinder. Available in three versions, depending of the air supply you want. A perfect creation for entering in the LEGO Pneumatic Engine world !
Hand Pump (4x Pumps with Air Tank)
0,00 € -Excl. Tax
A LEGO Technic Hand Pump with 4x Pumps and 1x Air Tank, to power your LEGO Pneumatic Creation, with free building instructions.
Specifications
- LEGO Hand Pump to power your pneumatic creation (example 1, 2, 3)
- Dimensions : 13cm (L) x 10cm (W) x 11cm (H)
- Ergonomic shape for the hand
- 4x pumps + 1x air tank
- Ideal for small pneumatic engine or machine
- Free instructions
How to build ?
The PDF instructions can be downloaded for free on this shop. The instruction contains the partlist at the end, that you can check in the instructions preview below.
For the hose, the bill of material represents the solution I have chosen but you can use different lengths depending of your stock :
- 5102c02 and 5102c03 : use to connect the pump to the T (can be longer)
- 5102c11 : use to connect the air tank (can be longer or shorter if you do not pass the hose in holes)
- 5102c40 : use the connect the switch to the machine/vehicle to power, can be any lenght you have, recommended to use some long hose to have better handling
For alternative hose, I recommend 2/4mm hose from blokbricks which can be purchased at meter.
For alternative pneumatic elements, there are many from Chinese distributors but I have not tested so I can not recommend any brands for now.
The switch is only to release the internal pressure when non used, you can remove it if you do not need it, in this case unplug the hose to release air when needed.
The air tank is not mandatory but help make running smoothly the pneumatic engine by storing some air and pressure inside.
About this product
Instructions preview
Additional information
| Model Size | 13cm (L) x 10cm (W) x 11cm (H) |
|---|---|
| Color | Black |
| Categories | All, Free, Machine |
| Motorized | No |
| Building Difficulty | Easy |
| Piece Count | 122 |
| Bill Of Material | https://rebrickable.com/mocs/MOC-164704/Nico71/hand-pump-4x-pumps-with-air-tank/#parts |
| Purchased File | PDF Instructions (38 pages / 26mo) |
Related products
Pneumatic Mine Contraption
7,50 € -Excl. Tax
A LEGO Technic contraption machine, as a Pneumatic mine, featured single pneumatic engine, oil pump jack and sliding trolley to make a ball contraption.
Vertical Ball Clock
7,50 € -Excl. Tax
A combination between a clock and a marble run, as a LEGO Technic Vertical Ball Clock, with hours and minutes digits represented by balls in vertical digits, powered by a single motor.
You may also like…
3-Cylinder Pneumatic Engine
5,00 € -Excl. Tax
A LEGO Technic Pneumatic Engine, with 3 cylinders, 120° scotch yoke crankshaft, unmodified cylinders or switches, with 2023 new instructions.
Switchless Pneumatic Machine
10,00 € -Excl. Tax
A LEGO Technic Pneumatic Switchless Machine with adjustable timing, working throttle, with idle mechanism, and openable controls panel.
Steam Machine (Pneumatic)
10,00 € -Excl. Tax
A LEGO Technic steam machine powered by a 2-cylinder pneumatic engine, with valve gear mechanism, speed indicator and air control valve.